How Much Does Appliance Repair Cost?

Learn the typical price of hiring professional appliance repair from Evans Appliance Repair:

Kitchens are filled with several electrical appliances. An electrical stove, dishwasher or refrigerator needs proper wires. In the event any appliance is incorrectly installed, it creates a real risk of fire. To guarantee your electrical appliances are up to snuff, it is important to hire a certified service for appliance repair.

DIY electrical service for appliances is not a recommended idea. There are some minor repairs where ”do-it-yourself” might be possible. In those situations, be sure to use the correct tools and to turn off the power source.

Troubleshooting larger appliances, however, is more difficult. Do not attempt ”do-it-yourself” repair. Your range, for example, might need a 250- or 125-volt circuit depending on if it is completely gas-powered or electrical, and you will need to have at least two 20-amp, 125-volt circuits to run smaller kitchen appliances. These types of circuits will support multiple electrical outlets, but do not overload them — which often will mean, a third outlet is necessary.

The risk of a short (which might cause major injury or death) during any type of larger project in most cases won’t be worth it. Just call a professional service in CITY, STATE.

You can search for appliance repair services in CITY on the internet. Look for companies with good customer reviews. Or find a a recommendation from a friend if you are experiencing problems with a stove, freezer or refrigerator.

Hiring professional appliance repair technicians begins with locating a contractor in CITY that has experience performing repair of kitchen appliances. Some repairmen are appliance-specific, and won’t offer repair for all types of appliances.

The single reason a lot of appliance repair services won’t be qualified to fix a kitchen appliance is because of the amount of electrical appliances that require water to run. Most refrigerators need water to make ice and , of course, dishwashers always need water to run. Water is very dangerous when it comes to electrical repairs.

If electrical service is not done the right way and a waterline ruptures, as an example, there’s a very good possibility of electrocution. Electricity and water do not mix.

And you want a CITY repairman who is able to deal with both elements.

Certified appliance repair technicians often charge close to $40 to $65 an hour for service, and independent contractors may cost somewhere between $80 and $120 an hour. This could sound too expensive, but it’s much better to pay a more expensive price for top-notch work. If a repair company is cheaper than $35 per hour, be skeptical.

Be sure the appliance repairman is pulling a permit from CITY for any kind of electrical work. Some unqualified technicians will say that they will not need a permit, but don’t trust them. Always confirm with CITY officials.

Most companies in CITY will charge a small amount for their travel, from $50 to $75. You will pay the complete price whether or not the repair is done, so it’s smart to have a list on-hand of appliances for the company to troubleshoot.

The national average is $159 for refrigerator repairs – local services in CITY often charge $75 to $150 per hour. Expect a $50 to $85 trip charge too for them to travel and inspect the issue.

The prices for new kitchen appliances range somewhere between $325 and $8,000. The wide range is dependent on the model of kitchen appliance, such as a expensive refrigerator to a low-cost oven.

Repairing or upgrading an electrical kitchen appliance is among the most difficult repair projects you can complete in a home.

One way to reduce these kinds of issues is listening very closely to a appliance repairman when he or she completes an estimate for repair. Certain types of wire should be used depending on the type of appliance, and colors of wires (for ground and neutral) might differ as local regulations or requirements are altered.

Additionally, many jurisdictions require arc fault protection for kitchen electrical circuits in addition to ground fault circuit interruption (GFCI) protection. If the contractor fails to mention this, or says that you do not “need” them, it is time to call a different company.

Plus, it’s important to follow a contractor attentively as he or she performs the first evaluation of the oven. If it is a brand new appliance he is installing, ask if it is able to use the exact same circuit or needs an enhancement since there are noticeable size and power usage differences in the newest models. The same recommendation goes for dishwashers and stoves.

A professional should be able to convey what it is they are going to do, why it is needed and highlight each part of the final fee, which includes appliance parts, labor and miscellaneous. There are some appliance repair services willing to wave the service fee if service is done.

OTHER RESOURCES:

Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts